Helkama Bica Marine and Offshore Cables EN

Tel. +358 2 410 8700 , fax +358 2 237 2428 , helkamabica.com Subject to change without prior notice. See latest updates on our webpage. 36 10/2017 LKSM-VFD Armoured power and control cable with improved EMC screening 1,8/3kV DESIGN: STANDARDS: IEC 60092-353, design 1. Conductor - stranded copper conductor IEC 60228, class 5 - tinned stranded copper conductor on request 2. Insulation - XLPE plastic IEC 60092-360 3. Cabling / - cabling with optional fillers or dummy cores to obtain symmetrical bedding and round construction 4. Screen - copper tape, coverage 100% 5. Armour - copper wire braid, coverage > 90% IEC 60092-350 - tinned copper wire braid on request 6. Rip cord - rip cord for conductors from 16mm 2 7. Sheath - polyolefine plastic, SHF1 IEC 60092-360 - on request, thermosetting polyolefine, SHF2 - standard colour black, other colours on request Application: For fixed installation in most areas and on open deck in ships and offshore units. Design to meet requirements for V ariable F requency D rivers (VFD). Suitable for voltage peaks up to 3kV. Main characteristics Rated voltage 1,8/3kV (3,6kV) Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A Halogen-free IEC 60754 series Smoke emission IEC 61034 series Oil resistance (only SHF2) IEC 60811-404 conditions according to 60092-360/SHF2 Transfer impedance IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m]) Temperature rating: Maximum conductor temperature + 90 °C Fixed installation - 40 °C to +80 °C Minimum recommended installation temperature - 15 °C For details see general information section ● Flame-retardant ● Halogen-free ● Low smoke emission ● Oil resistant (only SHF2)

RkJQdWJsaXNoZXIy NTQzMTI=